|
Airless Spray
Liquid Addition:
Airless Spray
The airless spray design is much more versatile in operation than
the standard dispersion disc design. The airless spray system has
fewer restrictions, offering finer atomization of liquids (to 6 microns)
for extended coatings and/or a more closely controlled granulation
size range.
This design also
allows for greater flexibility in load levels. It is not uncommon
to have a successful liquid addition at load levels down to 50% of
the rated capacity. This design does not automatically require an
agitator bar.
Precision Granulations
When used as the liquid injection device in Gemco formulators and
blenders, airless spray provides highly uniform granulations. Precise
droplet size control guarantees the consistency of the process, time
after time.
Spray On The
Product
Since the nozzle only sprays down on the product, there is no liquid
spray-through to the walls. Caked material on the discs is eliminated.
Active ingredients in the spray are not lost in the cake.
Capabilities:
- Handles highly
viscous liquids without dilution or carriers.
- Closed system
during blending protects workers from fumes.
- Sprays at
volumes up to eight (8) gallons per minute.
- Produces liquid
droplets as small as 6 microns.
- Provides precise
control over liquid amounts down to tenths of an ounce.
- Can be equipped
with heaters to liquefy solid materials.
For more information or to meet with a representative call: 800OKGEMCO
(800-654-3626) 732-752-7900
Fax: 732-752-5857 Email: parts@okgemco.com
Web site: www.okgemco.com
Back to newsletter
|
