Preowned Equipment
GEMCO provides a large selection of our preowned industrial tumble mixers and dryers. Whether you need a cost-effective solution for a new application or a replacement for an existing machine, GEMCO offers the right equipment for you.
In addition to our preowned equipment selection, GEMCO also offers a comprehensive upgrade program. Our expert engineering staff can upgrade your GEMCO tumble mixer or dryer to meet your latest production requirements. This may include features such as loading and discharging systems, safety interlocks, and the latest monitoring and control technology.
GEMCO is built to last!
Look at the list below and contact us today to learn more!
GEMCO 16QT/.5CF V-Shape Blender
Item # 001
- Preowned Gemco V-shape interchangeable vessel
- .5 cubic feet working capacity
- 316 stainless steel
- PLC controlled
- Four vessels included; liquid addition capable.
- As is, running condition.
SOLD: GEMCO 5 CF – DOUBLE CONE BLENDER WITH LIQUID SOLIDS BAR
Item # 002
- Stainless steel, pharmaceutical grade construction
- Rated for 60 lb./CF product density
- 16″ charging port with gasketed vented cover and 3 swing mounted screw down holding clamps
- Liquid solids bar with two dispersion disks, 6” discharge with manually operated butterfly valve, front and rear stainless-steel frame with acrylic doors protecting rotating blender with integrated electro-mechanical safety interlocks
- One horsepower shell drive with grove gear reducer directly driving shell at 24 RPM, 5 horsepower reliance motor belt driving liquid solids bar @ 2200 RPM, all drive by reliance 230/460/3 phase, motors are enclosed in stainless steel cabinets with full hinged service doors, factory control panel wired 230/3 phase
- Service includes timers for shell and bar, digital tachometer for shell, power indicator light, control START/STOP, master STOP and e-STOP, jog run functions and jog button, stainless steel frame with four 8” and locking casters, swing mounted floor legs
- Blender has 34″ discharge
- SERIAL # B-91910
- As is, where is.
GEMCO 16QT/.5CF Double Cone Blender
Item # 003
- Preowned Gemco V-shape blender
- .5 cubic feet working capacity
- Acrylic
- PLC controlled, four vessels included, liquid addition capable with agitator
- As is, running condition.
GEMCO 16QT/.5CF Double Cone Blender
Item # 004
- Preowned Gemco double cone blender
- .5 cubic feet working capacity
- Acrylic
- PLC controlled, four vessels included, liquid addition capable with agitator.
- As is, running condition.
0.017CF GEMCO Slant Cone Lab Blender, S/S, 65# Density
Item # 005
- Preowned 0.5-liter (0.017 cu ft.) Gemco slant cone blender
- Model GLB, stainless steel construction
- Bench top cantilevered design, rated 65#/cu. ft. max material density, 0.5 hp 115-volt motor with AC inverter, 38-72 RPM.
- As is, where is.
1 CF GEMCO Double Cone Dryer , S/S
Item # 006
- Preowned 1 CF Gemco double cone blender
- Stainless steel construction
- Rated 30 psi and full vacuum at 350 f internal, jacketed for 30 psi at 350 f
- Rated 100#/cu ft max material density
- 11″ feed opening with cover, 4″ outlet, with .75 hp, 230/460-volt motor drive, on legs
- Built 2007
- As is, where is.
1.05 CF GEMCO V-Shape Blender, 316, S/S
Item # 007
- Preowned Gemco V-Shape Blender
- 1.05 Cubic Feet Working Capacity
- 316 Stainless Steel
- Maximum material density 270 pounds a cubic foot
- Working Capacity minimum 0.95 to 1.05 maximum cubic feet. (2) 11-1/2″ Diameter top charge ports with covers.
- Shell driven by a 1 hp, 3/60/208-230/460-volt, 1750 rpm motor thru a reducer, ratio 25 to 1, output rpm 23.5, (1) Pin bar driven by a 1 hp, 3/60/208-230/460-volt, 1750 rpm motor. 6″ Center bottom outlet.
- Includes a control
- Mounted on carbon steel legs with casters
- As is, where is.
GEMCO 2CF V-Shape Vacuum Dryer 316 S/S
Item # 008
- Preowned 2 cu ft Gemco twin shell vacuum dryer
- Stainless steel construction
- Rated full vacuum internal at 250 f, jacketed for 50 psi at 250 f, rated 65#/cu ft maximum material density, 6″ bottom outlet with valve, on stainless steel stand with 1 hp, 230/460-volt motor drive
- Vessel serial # 88971
- National board # 2,
- Built 1989
- As is, where is.
GEMCO 3CF V-Shape Blender S/S
Item # 009
- Preowned 3 cu ft Gemco V-Shape blender
- Stainless steel construction
- Rated 150 #/cu ft. maximum material density
- On stainless steel stands with 1 hp, 208-230/460-volt motor drive, serial# B-89236, built 1989
- Safety gates and control panel included
- As is, where is.
GEMCO 3CF Slant Cone Dryer S/S
Item # 010
- Brand NEW!
- 3CF Gemco slant cone dryer
- 316 stainless steel construction
- With liquid addition
- Optional Agitator
- S/N: 220296
GEMCO 3CF Double Cone Blender S/S
Item # 011
- Recently refurbished 3CF Gemco double cone blender
- Stainless steel construction
- Dimple jacket with agitator
- Built in the 1980s
- As is, running condition.
GEMCO 5CF V-Shape Blender S/S
Item # 012
- Preowned 5 cu ft Gemco twin shell blender
- Model DD-Blender
- Stainless steel construction
- Rated 70 #/cu ft max material density, 1 hp shell drive, 3 hp bar drive (less bar), 460 volt, 3phase, approximately 6″ outlet, on wheels, missing (1) cover
- Serial # GBL-97099
- Built 1997
- As is, where is.
SOLD: GEMCO 10CF Slant Cone Blender (Convertible – Agitator Ready)
Item # 013
- Preowned 10CF Gemco slant cone portable blender
- Stainless steel construction
- Portable with safety gates
- PLC controls, 316 stainless steel construction, motor bearing covers, ultra sanitary
- S/N: 15020
- As is, running condition.
GEMCO 20CF Vacuum Double Cone Dryer, 200lb/CF Max Density
Item # 014
- Built in 1981
- Previously used to dry metal powders saturated with water
- As is, where is.
GEMCO 20 CF Twin Shell Formulator
Item # 015
- Preowned 20 cu. Ft. Gemco V-Shape Formulator
- 304 stainless steel construction
- Rated full vacuum internal jacketed for 30 psi at 350° F, liquid feed intensifier bar driven by approximately 5 hp motor with variable speed sheave, 2 hp Reeves variable speed shell drive with .75 hp positioning motor drive, all motors 230/460 volt, xp design
- Gemcomatic feed and discharge with Gemco valve
- Standard top access ports with covers, on stands
- As is, where is.
GEMCO 30CF Slant Cone Blender S/S
Item # 016
- Preowned 30 Cu Ft Gemco slant cone blender
- Stainless steel construction, with high-speed bar with motor drive
- Gemcomatic discharge on stand with motor drive and positioning motor
- As is, where is.
GEMCO 30CF Slant Cone Blender S/S 55# Density
Item # 017
- Preowned 30 cu ft Gemco slant cone blender
- Stainless steel construction
- Rated 55#/cu ft maximum material density
- Shell driven by 3 hp motor with 2 hp positioning drive, bar driven by 7.5 hp motor, 230/460-volt xp motors
- On stands
- Serial # BL-90792
- As is, where is.
GEMCO 30CF Double Cone Blender S/S
Item # 018
- Preowned 30 cu ft Gemco double cone blender
- Stainless steel construction
- Rated 100#/cu ft max material density
- Provision for internal bar and Gemcomatic loader/unloader (both bar and Gemcomatic are not currently with unit)
- On stands with 5 hp main drive and 2 hp positioning drive, 15 hp bar motor, XP motors, 230/460 volt
- Serial # B-94072
- Built 1994
- As is, where is.
GEMCO 100CF Double Cone Blender
Item # 019
- Preowned- Gemco Double Cone Blender
- Approximate 100 Cubic Feet Working Capacity (140 total)
- 304 Stainless Steel. 7-1/2 hp, 3/60/230/460 volt, 1770 rpm gear motor
- Pneumatic brakes
- 18″ Diameter intake door and 8″ port
- 12″ Center bottom outlet with manual butterfly valve
- Has 84″ inside diameter belly band
- As is, where is.
GEMCO 120CF Slant Cone Blender
Item # 020
- Preowned- Gemco Slant Cone Blender
- Model 120 Cubic Foot
- Stainless Steel
- Approximate 30″ straight side x 80″ diameter
- 38″ top cone, 54″ bottom cone
- 18-1/2″ Manway no cover, 12″ center bottom outlet. Driven by a 20 hp 3/60/230/460 volt, 1770 rpm motor through a gearbox 16:1. Includes a 3 hp motor
- Mounted on Carbon Steel stand. Missing small gear, valve and guards
- As is, where is.
GEMCO 125 CF Drum Lift
Item # 021
- Used GEMCO Belt Drive Blender 125 cu ft.
- Stainless Steel twin shell blender with attached Tubar drum lift/blender charger
- Rated for 75 lbs per cu ft.
- 12″ Valve
- Approximately 73 leg extensions
- Approximately 84″ discharge height
- SN: 6BL-29467
- As is, where is.
GEMCO 300 CF Twin Shell Blender S/S
Item # 022
- Used 300 cu ft. Gemco twin shell blender
- Stainless Steel construction
- On stand, with shell motor drive
- As is, where is.
